Los Angeles Appliance Repair: Washing Machine Repair

Washer Repair: How delicate is the “delicate” cycle?
The systems used for delicate cycles vary widely. Units with at least a two-speed motor--one speed for regular and another for delicate--are usually more gentle than units with only one speed.
Why do items sometimes tear in my washer?
During the wash cycle, the agitator in the center of a top-loading washer rotates back and forth rapidly. If the unit is too full, or if the agitator happens to catch a piece of clothing in an unfortunate way, it may tear certain clothes. When washing fragile things, put them into a net laundry bag (available in our accessories section), before you wash them.
What causes those fuzzy balls on some clothing during Washing machine repair?
Many synthetic clothes shed small fibers that ball up and cling to the clothes. Remove these "pills," if you like, with a fuzz-removing device that you can get from your local clothing materials supplier. Overloading your washer can make this condition worse.
How do I know how many clothes to put into the washer or washing machine?
For a top loader, a general rule of thumb is to lay clothes loosely inside the washer until they reach the top of the agitator. For a front loader, fill it until it's full, with minimal compression of the clothes.
Is it bad to let the machine run with an unbalanced load?
Yes. Washing machines are complex and have many functional components. It's always best to stop an unbalanced load, rearrange it, and re-start the washer. Watch out for this when doing washing machine repair
Is it true that a nail, accidentally put in the washer, can break it?
Absolutely. So can a small chain or any other small metal object. That’s why it’s important to always empty all pockets before laundering.
How can I get rid of residual soap suds at the end of a cycle?
This is usually an indication that you're using too much detergent for the clothes you are washing. Try reducing the amount of detergent by half. Then, if the clothes aren't getting clean, increase the amount slightly for each load, until the clothes do get clean.
Washer Machine/Washer Repair: Why do some clothing dealers suggest washing clothes inside out?
In the washer, the clothes often turn inside out during the agitation cycle. Turning the clothes inside out first may be easier on the clothing. It limits abrasion on the “good” side of the fabric, reducing “pilling” and extending the life of some fabrics such as corduroy. In addition, any embroidery, decals, and so on are better preserved. It should not affect the performance of the cleaning action to have the clothes inside out during wash.